Home Page / CASE POLYOLS
INTRODUCTION
These products are the raw material of polyurethane elastomers, coating, sealant, adhesive and chemical grouting material. They are mostly 2 or 3 functionality with different molecular weight from 400 to 5000.
APPLICATION
Widely used for producing Polyurethane elastomers, coating, sealant, adhesive. And also can be in rigid foam system to reduce the viscosity of the system. Some of them can be used to produce OCF and MS sealant.
TECHNICAL DATA SHEET
| Brand |
Colour (APHA) |
OHV (mgKOH/g) |
Viscosity (mPa.s/25?) |
H2O content (%) |
Acid Value (mgKOH/g) |
PH |
K+. (mg/Kg) |
Degree of unsaturation (mol/Kg) |
Application |
|---|---|---|---|---|---|---|---|---|---|
| INOVOL C204 | ≤50 | 265-295 | 60-80 | ≤0.05 | ≤0.05 | 5.0-7.0 | ≤5 | - | Can be used for elastomer chain extender, foam glue, polyurethane grouting material, coating etc. |
| INOVOL C210 | ≤50 | 107-116 | 120-180 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Can be used for polyurethane elastomers, adhesives, sealants, waterproof coating, paving materials etc. |
| INOVOL C220 | ≤50 | 54.0-58.0 | 270-370 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Can be used for polyurethane elastomers, adhesives, sealants, waterproof coating, paving materials etc. |
| INOVOL C230 | ≤50 | 35.0-40.0 | 500-600 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Can be used for polyurethane elastomers, adhesives, sealants, waterproof coating, paving materials etc. |
| INOVOL C240 | ≤50 | 26.0-30.0 | 800-1000 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Can be used for polyurethane elastomers, adhesives, sealants, waterproof coating, paving materials etc. |
| INOVOL C260 | ≤50 | 17.5-19.5 | 1200-1800 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Used for polyurethane elastomers, adhesives, sealants etc. |
| INOVOL C280 | ≤50 | 13.0-15.0 | 2300-3500 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Used for polyurethane elastomers, adhesives, sealants etc. |
| INOVOL C2120 | ≤50 | 8.85-9.85 | 5000-9000 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Used for polyurethane elastomers, adhesives, sealants etc. |
| INOVOL C303 | ≤100 | 435-465 | 350-500 | ≤0.08 | ≤0.08 | 5.0-7.0 | ≤8 | - | Cross linking agent for rigid foam or elastomer, foam glue, polyurethane coating etc. |
| INOVOL C305 | ≤80 | 325-355 | 250-400 | ≤0.05 | ≤0.08 | 5.0-7.0 | ≤5 | - | Cross linking agent for rigid foam or elastomer, foam glue, polyurethane coating etc. |
| INOVOL C307 | ≤80 | 220-260 | 200-400 | ≤0.05 | ≤0.08 | 5.0-7.0 | ≤5 | - | Cross linking agent for rigid foam or elastomer, foam glue, polyurethane coating etc. |
| INOVOL C310 | ≤80 | 158-178 | 200-300 | ≤0.05 | ≤0.08 | 5.0-7.0 | ≤5 | - | Cross linking agent for rigid foam or elastomer, foam glue, polyurethane coating etc. |
| INOVOL C3050A | ≤50 | 54.0-58.0 | 400-700 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Can be used for polyurethane elastomer, waterproof coating, paving materials etc. |
| INOVOL C360 | ≤50 | 26.0-29.0 | 1300-2200 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Used for polyurethane elastomers, adhesives, sealants etc. |
| INOVOL C390 | ≤50 | 18.1-19.3 | 2200-3200 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | ≤0.01 | Used for polyurethane elastomers, adhesives, sealants etc. |
